Invalid Trunk Name Entered
.At either the global or context configuration level, you can assign a unique name to a port. You can also assign the same name to multiple ports.The friendly port names you configure appear in the output of the show name port-list, show config, and show interface commands. They do not appear in the output of other show commands or in Menu interface screens. (See.).Friendly port names are not a substitute for port numbers in CLI commands or Menu displays.Trunking ports together does not affect friendly naming for the individual ports.
(If you want the same name for all ports in a trunk, you must individually assign the name to each port.).A friendly port name can have up to 64 contiguous alphanumeric characters.Blank spaces within friendly port names are not allowed, and if used, cause an invalid input error. (The switch interprets a blank space as a name terminator.).In a port listing, not assigned indicates that the port does not have a name assignment other than its fixed port number.To retain friendly port names across reboots, you must save the current running-configuration to the startup-config file after entering the friendly port names. (In the CLI, use the write memory command.).
Newbie here, but I’ve played around with Asterisk, Trixbox, PIAF, FreePBX over the years. I’ve just installed the newest version of PIAF Incredible PBX (Purple). I attempted to add a new SIP trunk, through FreePBX of course, but when I tried to save it I received an error stating “Invalid Trunk Name Entered”. So I tried another name, and got the same error.
Invalid Trunk Name Entered Key
In order to try to get the trunk up and working I chose to try to edit, in FreePBX, the unused ‘sipgate’ trunk which had been automatically created when I installed PIAF. I edited the required info and changed the name from ‘sipgate’ to ‘voipms’ and saved it without any problem and the trunk works. But since then I have tried to create other SIP trunks and repeatedly receive the “Invalid Trunk Name Entered” error no matter what name I choose to call it. Bottom line is that I am unable to create any trunks.
Feb 3, 2019 - No matter what I do, I get a message that says, “Invalid trunk name entered” I have googled this and the best answer that I have seen is that the. Oct 14, 2013 - Bright House Networks SIP Trunk service provides PSTN access via SIP trunks between the enterprise. Proper response/error treatment when dialing invalid PSTN numbers. Calling number and calling name blocking (Privacy). Entering or leaving the enterprise flows through the Avaya SBCE. To name an individual port in a trunk group, enter a command such as the following at. Port configuration is not valid for static trunk groups on the HP device.
I have no clue as to where to start to troubleshoot this problem. Any and all help/advice would be much appreciated.Thanks,Michael.